FF_1234_green.png
FFZERO_cartridge_2022_edited.png

View or Download: Flash Floor MSDS or Flash Floor Instructions

VOC-FREE ✓
LOW ODOR ✓
NO POT MIXING ✓
NO SAW CUTTING ✓
MINIMAL PREP ✓
SELF MIXING ✓
NO DOWN TIME ✓

Flash Floor ZERO has no VOCs and has nearly no odor. Flash Floor ZERO is a high-penetration two-part hybrid When combine with a moisture-free sand, forms a durable, long-lasting instant concrete repair.

 

Like our standard Flash Floor, the new no VOC formula is designed to create extremely high bond strengths, reinforces the repair area, and can absorb heavy loads without cracking or dis-bonding. It is highly chemically resistant and can be applied in a wide range of temperatures. It is excellent for industrial floor repairs subject to forklift traffic and harsh conditions.

70e5e1cdcbd636c3fb4a881b5149ae7f.png

USE IT IN COLD STORAGE UP TO -40°F

• Withstands the abuse of heavy forklift traffic. 

• Rebuild worn control joints.

• Fill deep or shallow spalls

• Fill large cracks

• Fill large deep holes.

• Grade matching = create transitions or ramps (some grinding may be required)

• Compatible with coatings, diamond polishing, and it's paintable. 
• Can be used in hot humid climates or in cold storage (up to -40° F)

Additional Notes:
Flash Floor ZERO is designed for use on interior concrete surfaces. It is not intended for repairing areas than are subject to slab movement.

 

Flash Floor ZERO must be applied to concrete free of surface moisture, dirt, and contaminates.

TECHNICAL DATA:

Color:

Natural Off-white. Color of sand determines final color.

Compressive Strength, ASTM D695:

4109 ± 65 psi depending on sand load.

Tensile Strength, ASTM D638:

4260 ± 245

Elongation ASTM D6384.2 ± 1.0

Hardness: 70D

Viscosity: Approximately 30cps

V.O.C. (Mixed): Zero

Cure Time: Approximately 20 minutes at 72 F (22 C).

Packaging: 600ml Twin Cartridge #61300 Two-gallon Kit #61020 Ten Gallon Kit #61050